banner



How To Make A Nail Bat

Turn a Baseball Bat into A Amend Weapon

63c454c4c9306500add0f1cb9860049c_large-1

A baseball bat can be used every bit a weapon without any modification. However, you tin brand a few small

adjustments and turn it into a highly-effective and potentially lethal tool to have at your disposal. All

y'all need is some basic cloth along with a dose of ingenuity, and you can tremendously enhance

your options if you lot are in a close combat state of affairs with an attacker. Below are a few options to

consider, and feel free to use them to assistance get your own artistic juices flowing.

Screen-Shot-2015-12-22-at-10.25.45-AM

Stakes or Nails

If you have a hammer and a stake, all you need to do is pound it in through one end of the bat and let

the pointy end stick out of the other side. This in and of itself is a very constructive deterrent that would

make virtually people think twice nearly advancing as you begin to swing. However, information technology but provides 1

betoken of contact, and this may not be all that effective if the assaulter moves out of range. This is where

multiple nails come in.

Y'all tin can create an omni-directional weapon by nailing in a series of long nails through the end of the

bat. You will probably need nails that are at least four inches long to provide optimal protection. Simply

start driving nails from one side to the other, leaving spaces big enough to boom other ones from the

other side. Keep turning the bat and hammering abroad until the entire surface is covered with spiky

protrusions that will provide a much more than effective deterrent effect.

011ab2a21b568479c2f45f2a352eac02

Blades

You can also take the blades from knives and insert them into the wood of the bat also. Notwithstanding,

they may not exist as piece of cake to hammer through the bat as nails or stakes. Ane selection is to saw or diameter out

a pigsty that the blades tin can slide through. Then, you can hammer the ends in until they are flush with the

bat. Secure them on both sides by wrapping duct tape between the blades around the bat.

flail3

Ball and Chain

Finally, yous can also use the handle of your bat and create a ball and chain with nails and duct tape.

But make a baseball sized wad of duct record, push the nails through so they stick out from the other

side and tape them in place. Take a couple of long pieces of duct tape, fold them in half lengthwise and

and so tape them together to serve every bit the chain. Adhere to the ball equally well as the handle of the bat. Brand

sure that both pieces are securely tightened to prevent them from detaching every bit you swing. Wielding

this type of weapon will produce fantastic results as long equally you lot have some do and get

comfortable with using it.

These are just a few examples of how you can modify a bat and raise its effectiveness in a gainsay

situation. Blows from bats can be deflected by diverse body movements, but having pointy bits to

contend with will brand deflecting a painful experience that a potential attacker would have to contend

with. These tricks are definitely worth exploring, and yous will be glad that you've incorporated these

enhancements into your defensive strategies.

How To Make A Nail Bat,

Source: http://shtfsurvivalsecrets.com/survivadiy/turn-a-baseball-bat-into-a-better-weapon/

Posted by: washingtonmants1960.blogspot.com

0 Response to "How To Make A Nail Bat"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel